NO.4 Stainless Steel Sheets
Straight silk ( Hair Line ) thread is the uninterrupted grain from top to bottom. Generally, the workpiece of the fixed wire drawing machine can be moved back and forth.
Send InquiryProduct Description
1. Straight silk ( Hair Line ) thread is the uninterrupted grain from top to bottom. Generally, the workpiece of the fixed wire drawing machine can be moved back and forth.
2. The nylon pattern is composed of different lengths and lengths. Because the nylon wheel is soft in texture, it can grind uneven parts and reach the nylon pattern.
3, snow pattern( NO.4 ) is now the most popular one, composed of a little bit of specifications, can be achieved with insect-like sandpaper.
The cylinder's surface can be applied to the lathe or grinder. It only takes surface treatment. It can be clamped with abrasives and then the top lathe is polished with cloth and adhesive strip. If the accuracy and surface roughness are large, the milling machine is required. Polished. The drawing process is very particular in stainless steel's use, and also the application and process are required.
Under ordinary circumstances, it is imperative to fix and revive the wire drawing on process equipment to produce the final result, and the total drawing result. Straight oil: It ought to mean oil directly cord, drawing after oil grinding, the surface of the ink is brighter after the ink, and then a layer of wire drawing, which is a type of frosting, also belongs to the surface cure, today includes a complete roll of ink attracted compared with regular cable drawing, the oil-grinding straight cable has the advantages of clear brushed texture, neat texture, good gloss and excellent overall impact, and is commonly utilized in elevator decoration and other gear using higher surface requirements.
After the surface is drawn, the raw material sheet is usually treated. After the surface of the original board is created of NO.4 (snowflake) or HL (brushed), the final product is processed (die, deep drawing, etc.). Following the processing system, the product can maintain the surface effect of the board.
Production Rang :
Finish: No.3, No.4, No.5, No.8, SB, Color coating, #3, #4, #8
Film: PVC, PE, PI, Laser PVC, 20um-120um
Thickness: 0.3mm - 3.0mm
Width: 300mm - 1500mm, the narrowed products pls check in strip products
Grade: 304 316L 201 202 430 410s 409 409L
Main grade description in different standard
ASTM | DIN / EN | JIS | GB | ISO Name | Other |
S20100 201 | 1.4372 | SUS201 | S35350 | X12CrMnNiN17–7-5 | J1 L1 LH 201J1 |
S20200 202 | 1.4373 | SUS202 | S35450 | X12CrMnNiN18–9-5 | 202 L4, 202 J4, 202 J3 |
S30400 304 | 1.4301 | SUS304 | S30408 | X5CrNi18-10 | 06Cr19Ni10 0Cr18Ni9 |
S31603 316L | 1.4404 | SUS316L | S31603 | X2CrNiMo17-12-2 | 022Cr17Ni12Mo2 00Cr17Ni14Mo2 |
S40900 409 | - | SUH409 | S11168 | X5CrTi12 | 0Cr11Ti |
S40910 409L | 1.4512 | SUH409L | S11163 | X2CrTi12 | 00Cr11Ti 022Cr11Ti |
S41008 410S | 1.4000 | SUS410S | S11306 | X6Cr13 | - |
S43000 430 | 1.4016 | SUS430 | 10Cr17 | X6Cr17 | 1Cr17 |
Main grade chemical component in different standard
201 | C % | Si% | Mn % | P % | S % | Ni % | Cr % | N % | Mo % |
ASTM | 0.15 | 1.00 | 5.5-7.5 | 0.050 | 0.030 | 3.5-5.5 | 16.0-18.0 | 0.25 | - |
DIN/EN | 0,15 | 1,00 | 5,5-7,5 | 0,045 | 0,015 | 3,5-5,5 | 16,0-18,0 | 0,05-0,25 | - |
JIS | 0.15 | 1.00 | 5.5-7.5 | 0.060 | 0.030 | 3.5-5.5 | 16.0-18.0 | 0.25 | - |
GB | 0.15 | 1.00 | 5.5-7.5 | 0.050 | 0.030 | 3.5-5.5 | 16.0-18.0 | 0.05-0.25 | - |
202 | C % | Si% | Mn % | P % | S % | Ni % | Cr % | N % | Mo % |
ASTM | 0.15 | 1.00 | 7.5-10.0 | 0.060 | 0.030 | 4.0-6.0 | 17.0-19.0 | 0.25 | - |
DIN/EN | 0,15 | 1,00 | 7,5-10,5 | 0,045 | 0,015 | 4,0-6,0 | 17,0-19,0 | 0,05-0,25 | - |
JIS | 0.15 | 1.00 | 7.5-10.0 | 0.060 | 0.030 | 4.0-6.0 | 17.0-19.0 | 0.25 | - |
GB | 0.15 | 1.00 | 7.5-10.0 | 0.050 | 0.030 | 4.0-6.0 | 17.0-19.0 | 0.05-0.25 | - |
304 | C % | Si% | Mn % | P % | S % | Ni % | Cr % | N % | Mo % |
ASTM | 0.08 | 0.75 | 2.00 | 0.045 | 0.030 | 8.0 - 10.5 | 18.0-20.0 | 0.10 | - |
DIN/EN | 0,07 | 1,00 | 2,00 | 0,045 | 0,015 | 8,0 - 10,5 | 17,5-19,5 | 0,10 | - |
JIS | 0.08 | 1.00 | 2.00 | 0.045 | 0.030 | 8.0 - 10.5 | 18.0-20.0 | - | - |
GB | 0.08 | 1.00 | 2.00 | 0.045 | 0.030 | 8.0 - 10.0 | 18.0-20. 0 | - | - |
316L | C % | Si% | Mn % | P % | S % | Ni % | Cr % | N % | Mo % |
ASTM | 0.030 | 0.75 | 2.00 | 0.045 | 0.030 | 10.0-14.0 | 16.0-18.0 | 0.10 | 2.00-3.00 |
DIN/EN | 0,030 | 1,00 | 2,00 | 0,045 | 0,015 | 10,0-13,0 | 16,5-18,5 | 0,10 | 2,00-2,50 |
JIS | 0.030 | 1.00 | 2.00 | 0.045 | 0.030 | 12.0-15.0 | 16.0-18.0 | - | 2.00-3.00 |
GB | 0.030 | 0.75 | 2.00 | 0.045 | 0.030 | 10.0-14.0 | 16.0-18.0 | 0.10 | 2.00-3.00 |
409 | C % | Si% | Mn % | P % | S % | Ni % | Cr % | N % | Ti % |
ASTM | 0.08 | 1.00 | 1.00 | 0.045 | 0.03 | 0.50 | 10.5-11.7 | - | 6*C% - 0.75 |
DIN/EN | - | - | - | - | - | - | - | - | - |
JIS | 0.08 | 1.00 | 1.00 | 0.040 | 0.030 | - | 10.5-11.7 | - | 6*C% - 0.75 |
GB | 0.08 | 1.00 | 1.00 | 0.045 | 0.030 | 0.60 | 10.5-11.7 | - | 6*C% - 0.75 |
409L | C % | Si% | Mn % | P % | S % | Ni % | Cr % | N % | Ti % |
ASTM | 0.03 | 1.00 | 1.00 | 0.040 | 0.020 | 0.50 | 10.5-11.7 | 0.03 | 6*(C+N)-0.5 |
DIN/EN | 0.03 | 1.00 | 1.00 | 0.040 | 0.015 | - | 10.5-12.5 | - | 6*(C+N)-0.65 |
JIS | 0.03 | 1.00 | 1.00 | 0.040 | 0.030 | - | 10.5-11.7 | - | 6*C% - 0.75 |
GB | 0.03 | 1.00 | 1.00 | 0.040 | 0.020 | - | 10.5-11.7 | 0.03 | Ti≥8*(C+N) |
410S | C % | Si% | Mn % | P % | S % | Ni % | Cr % | N % | Mo % |
ASTM | 0.08 | 1.00 | 1.00 | 0.040 | 0.030 | 0.60 | 11.5-13.5 | - | - |
DIN/EN | 0,08 | 1,00 | 1,00 | 0,040 | 0,015 | - | 12,0-14,0 | - | - |
JIS | 0.08 | 1.00 | 1.00 | 0.040 | 0.030 | - | 11.5-13.5 | - | - |
GB | 0.08 | 1.00 | 1.00 | 0.040 | 0.030 | 0.60 | 11.5-13.5 | - | - |
Main grade mechanical property in different standard
201 | Y.S./Mpa ≥ | T.S./Mpa ≥ | E.L./% ≥ | HB ≤ | HRB ≤ | HBW ≤ | HV ≤ |
ASTM | 260 | 515 | 40 | - | 95 | 217 | - |
JIS | 275 | 520 | 40 | 241 | 100 | - | 253 |
GB | 205 | 515 | 30 | - | 99 | - | - |
202 | Y.S./Mpa ≥ | T.S./Mpa ≥ | E.L./% ≥ | HB ≤ | HRB ≤ | HBW ≤ | HV ≤ |
ASTM | 260 | 620 | 40 | - | - | 241 | - |
JIS | 275 | 520 | 40 | - | 95 | 207 | 218 |
GB | - | - | - | - | - | - | - |
304 | Y.S./Mpa ≥ | T.S./Mpa ≥ | E.L./% ≥ | HB ≤ | HRB ≤ | HBW ≤ | HV ≤ |
ASTM | 205 | 515 | 40 | - | 92 | 201 | - |
JIS | 205 | 520 | 40 | 187 | 90 | - | 200 |
GB | 205 | 515 | 40 | - | 92 | 201 | 210 |
316L | Y.S./Mpa ≥ | T.S./Mpa ≥ | E.L./% ≥ | HB ≤ | HRB ≤ | HBW ≤ | HV ≤ |
ASTM | 170 | 485 | 40 | - | 95 | 217 | - |
JIS | 175 | 480 | 40 | 187 | 90 | 200 | |
GB | 170 | 485 | 40 | - | 95 | 217 | 220 |
409 | Y.S./Mpa ≥ | T.S./Mpa ≥ | E.L./% ≥ | HB ≤ | HRB ≤ | HBW ≤ | HV ≤ |
ASTM | - | - | - | - | - | - | - |
JIS | 175 | 360 | 22 | 162 | 80 | - | 175 |
GB | - | - | - | - | - | - | - |
409L | Y.S./Mpa ≥ | T.S./Mpa ≥ | E.L./% ≥ | HB ≤ | HRB ≤ | HBW ≤ | HV ≤ |
ASTM | 170 | 380 | 20 | - | 88 | 179 | - |
JIS | 175 | 360 | 25 | 162 | 80 | - | 175 |
GB | 170 | 380 | 20 | - | 88 | 179 | 200 |
410S | Y.S./Mpa ≥ | T.S./Mpa ≥ | E.L./% ≥ | HB ≤ | HRB ≤ | HBW ≤ | HV ≤ |
ASTM | 205 | 415 | 22 | - | 89 | 183 | - |
JIS | 205 | 410 | 20 | - | 88 | 183 | 200 |
GB | 205 | 415 | 20 | - | 89 | 183 | 200 |