tubiao
E-mail: [email protected]
Tel: +86-13761906384

316 316L Stainless Steel Sheets and Plate

316 is a stainless steel due to the addition of Mo aspects and also high temperature power has improved, high temperatures up-to 1200-1300 degrees, can be used under harsh ailments.

Send Inquiry

Product Description

316 is a stainless steel due to the addition of Mo aspects and also high temperature power has improved, high temperatures up-to 1200-1300 degrees, can be used under harsh ailments.


316L is a kind of stainless steel. Due to the molybdenum material in steel, this steel's complete performance is significantly much far better than that of 310 and 304 stainless steel. Under high temperature states, the moment the concentration of sulfuric acid is lower than 15% or less than 85%, 316L stainless steel includes a large range. use. 316L stainless steel additionally offers great resistance to chloride attack and can be therefore utilized in marine environments.


316L Stainless steel has a highest carbon content of 0.03 and can be used in software where annealing isn't possible and optimum corrosion resistance is required.


Production Rang :

-316 316L Cold Rolled Stainless Steel Sheet and Plate , Cold rolled 316 316L sheet, Cold rolled 316 316L Plate

Thickness

0.2mm - 3.0mm

Thickness

3.0mm-8.0mm, special for cold rolled

Width

300mm - 2000mm, the narrowed products pls check in strip products

Length

1000mm-6000mm

Finish

2B, 2D


-316 316L Hot Rolled Stainless Steel Sheet and Plate , Hot Rolled 316 316L Sheet, Hot Rolled 316 316L Plate,316 316L PMP, 316 316L CMP

Thickness

1.2mm - 200mm

Width

300mm - 3200mm

Length

500mm – 12000mm

Finish

Black, NO.1, Anneal pickling


Production Process and Feature

Corrosion resistance

Corrosion Resistance is far better compared to 304 stainless steel, together with excellent corrosion resistance from the manufacturing procedure for paper and pulp. 316L stainless steel is resistant to erosion from competitive and sea atmospheres.


316 Corrosion immunity is significantly much far better compared to 304 stainless steel, at the pulp and newspaper manufacturing process contains good rust immunity. Along with stainless steel is resistant towards this erosion of the competitive setting and their oceans.


Heat resistance

316 stainless steel has Great Rust Resistance for irregular usage below 871 ° C (1600 ° F) and steady use previously mentioned 927 ° C (1700 ° F). It is wise not to continuously use 316 stainless steel in the scope of 427 ° C-857 ° C (800 ° F-1575 ° F), but stainless steel possesses excellent heating resistance when 3-16 stainless steel is continuously used beyond this temperature range. 316L stainless steel carbide precipitation performance a lot better than 316 stainless steel, available in the aforementioned temperature selection.


316L Stainless steel includes good oxidation resistance in use beneath 1600 °C and constant use beneath 700 °C. At 800-1575 degrees' scope, it is best not to last to act. 316L stainless steel, however if 316L stainless steel is always used outside this temperature range, stainless steel includes excellent heat resistance. 316L stainless steel has carbide precipitation resistance compared to 316 stainless steel and can be utilised at the aforementioned temperature selection.


Heat treatment

Annealing is performed in a temperature at the scope of both 850 1050 ° C accompanied by annealing accompanied closely by accelerated cooling. 3-16 stainless steel may not be tempered by heat therapy.

Even the Alternative annealing is done at a temperature assortment of both 1010-1150 levels, and then cooled. 316L stainless steel may not be tempered by heat therapy.


Welding performance

316 Stainless steel with good welding performance. All standard welding processes could be used for welding. Welding can be used in line with the reason, respectively 316Cb, either 316L or 309Cb stainless steel filler rods or welding electrodes. As a way to obtain the optimal/optimally corrosion resistance, the welded section of stainless steel needs to become annealed after welding. In case 316L stainless steel is employed, no annealing is required.


316L stainless Steel has great welding components. All standard welding methods can be used for welding. If welding, 316Cb, either 316L or 309Cb stainless steel filler rods or welding rods may be used for welding according to this applying form. For best corrosion resistance, the vented section of 316 stainless steel requires post-weld annealing. In case 316L stainless steel has been employed, post-weld annealing isn't required.


Application

Applications are newspaper and papermaking equipment dyeing equipment, film processing devices, pipelines, construction exterior materials in coastal areas. Additionally utilised in the sphere of valves, including nut, housings, clamps, ball bench, stem therefore forth.


Pulp and paper Supplies heat Exchangers products, film processing tools exterior materials such as structures in coastal areas, and watch stores, see applications of watches and also examples. Sea-water using manufacturing supplies, chemicals, dyes, newspaper acid, and fertilizers and equipment; camera, food industry facilities, ropes, CD sticks, bolts.


Hot Tags: 316 316l stainless steel sheets and plate, China, manufacturers, suppliers, factory, wholesale, buy, price, disturbutor, for sale, Duplex wire, 2507 stainless steel sheets, stainless steel tube profiles, Duplex stainless steel wire, Stainless Bar, shaped steel tube
Related Products
Leave Message
Your privacy is important to us - we never sell or share your information.