+86-13166121150

304L Stainless Steel Sheets And Plate

304L Stainless Steel Sheet and Plate Supplier

  • Thickness: 0.05mm – 200mm
  • Width: 600mm – 2000mm, the narrowed products pls check in strip products
  • Length: 500mm-12000mm
  • Finish: 2B, 2D, Black, NO.1, Anneal pickling
  • MOQ: 2MT

Product Description


304L stainless steel, additionally called ultra-low carbon stainless steel, has been a more elastic stainless steel material that’s widely used to make parts and equipment which need good complete attributes (rust and formability).

Review to coil, strip, and the most more 304/304L sheets is probably the most frequently employed material, ordinarily, sheets are employed by bending and hitting as dimensions for several types of applications.

The stainless steel cold-rolled sheet is calendered around the grounds of the stainless steel hot-rolled sheet (annealed pickling is broadly speaking No. inch coating ). There are 2 d two surfaces, 2-B, the second area is demanding, the 2-B surface is more matte, nicer is the 2-B floor, therefore broadly speaking stainless steel cold-rolled sheet pertains to stainless steel cold-rolled sheet 2-B floor. The stainless steel wire drawing plate has been processed to the 120#, 180# even 240# 320# pulling system onto the face of stainless steel 2B, 2 d as well as NO.inch.

Due to the fact the area has a subway pit, it isn’t acceptable as a material and can be utilized at a few businesses. Since stainless steel cold-rolled sheet (notably the exterior of 2-B ) itself includes a sleek coating and also the consequence of this attractive drawing plank is so very excellent, the stainless steel drafting plank that’s commercially obtainable is normally made from stainless steel 2-B area.

The stainless steel cold-rolled sheet describes some metal sheets that includes already been cold-treated, pickled, and impregnated with means of a roll. Employed for decoration, corrosion, and rust.

Stainless steel cold-rolling might be broken into four different countries: noncold work-hardening (DY), semi-cold work-hardening (BY), chilly job hardening (Y), and particular chilly work-hardening (TY).

Production Range :


-Cold Rolled 304L Stainless Steel Sheet and Plate, Cold rolled 304L sheets, Cold rolled 304L Plate

  • Thickness: 0.05mm – 3.0mm
  • Width: 600mm – 2000mm, the narrowed products pls check in strip products
  • Length: 1000mm-6000mm
  • Finish: 2B, 2D

-Hot Rolled 304L Stainless Steel Sheet and Plate, Hot Rolled 304L Sheet, Hot Rolled 304L Plate,304L PMP, 304L CMP

  • Thickness: 1.2mm – 200mm
  • Width: 600mm – 3200mm
  • Length: 500mm – 12000mm
  • Finish: Black, NO.1, Anneal pickling

304 Stainless Steel Data Sheet


304L Grade description in different standard

ISO Name

ASTM

DIN / EN

JIS

GB

Other

X2CrNi19-11

S30403

304L

1.4306

SUS304L

S30403

022Cr19Ni10 00Cr19Ni10

304L Grade Chemical components in different standard

304L

C %

Si %

Mn %

P %

S %

Ni %

Cr %

Mo %

N %

Cu %

ASTM

0.03

0.75

2.00

0.045

0.030

8.0-12.0

18.0-20.0

0.10

 

DIN/EN

0,03

1,00

2,00

0,045

0,015

10,0-12,0

18,0-20,0

0,10

JIS

0.03

1.00

2.00

0.045

0.030

9.0-13.0

18.0-20.0

GB

0.03

0.75

2.00

0.045

0.030

8.00-12.0

18.0-20.0

0.10

304L mechanical property in different standard

304L

Y.S./Mpa ≥

T.S./Mpa ≥

E.L./% ≥

HB ≤

HRB ≤

HBW ≤

HV ≤

ASTM

170

485

40

92

201

JIS

175

480

40

187

90

200

GB

170

480

40

92

201

210

Production Process and Feature


Typical Different between 304 and 304L Hot rolled and Cold rolled description

1. The surface of this cold-rolled sheet includes a certain Steel cup used to wash water. Degree of gloss. It can be Very Similar to the very typical and is smooth to the signature

2. In the event the hot-rolled sheet is not pickled, it is similar to the face of many metal sheets in the marketplace. The outer lining rust is more reddish, and the face area without rust is purple-black (iron-oxide coating ).

3. The operation benefits of sexy and cold rolled Wrapped sheets really are:

  • (1) The precision is higher, and Also the Gap in Thickness of cold-rolled strip steel doesn’t exceed 0.01~0.03mm.
  • (2) The dimensions are significantly much thinner, the more cold-rolled design could be wrapped using a metal strip of 0.001 M M; the more sexy rolling is currently too lean as 0.78 M M.
  • (3) The top quality is excellent, and also also the cold-rolled metal plate can also produce a mirror coating; whereas the surface of this plate has flaws like iron oxide scale and so forth.
  • (4) Cold-rolled sheets may be adjusted with consumer requirements for example tensile strength and span such as style and layout and style features

Cold hot and rolling are just two systems that are. Cold-rolling is carried out within the instance of metal as its name implies. The hardness of the steel is so high. Sexy is that the steel Is Created from large temperatures, so Detailed:

The Sexy sheet Includes hardness, Simple Processing, and ductility.

The cold rolled sheet contains elevated hardness plus is still relatively hard to the procedure, however, is maybe perhaps not readily deformed and contains high durability.

The sexy wrapped sheet includes relatively very minimal durability, the top quality is all but inadequate (with low ion and smoothness), although also the plasticity is fine, broadly speaking thick and medium plate. Cold rolled sheet: higher durability, higher hardness, higher floor end sheet, is utilized for stamping plank.

Hot-rolled metal sheets and mechanical components are much less than liquid processing, and second forging processing, however, possesses improved durability and ductility.

Cold-rolled metal sheet features a selected amount of work hardening, and very low durability, but might attain a fantastic yield ratio, so useful to get cold-bending spring bits and also other components, and since the return position is nearer to this tensile strength, there’s not any threat throughout usage. An injury is probably going that occurs if the load exceeds the load.

Application


(1,2 tableware), closets, in-door pipelines, water heaters, boilers, tubs, vehicle components, medical tools, construction materials, compounds, foods business, agriculture, and boat elements.

304 304L is used in household Solutions

Quote within 24 hours!

Message Us Directly
Email or Call Us Directly
Email

export82@huaxia-intl.com

WhatsApp/Tel/WeChat

+86-13166121150