Stainless Steel Angle Bar: Sizes, Grades & Supplier Guide

Stainless steel angle bar: A Practical Buying Guide

Looking for a reliable stainless steel angle bar supplier? Huaxiao Stainless keeps 100,000 tons of inventory, ships in 15 days, and is certified to ISO/TS16949. Before you request a quote, here is what actually matters when specifying and sourcing stainless steel angle bar.

Why Choose Stainless Steel Angle Bar

Stainless steel angle bar (the L-profile) gives two perpendicular load-bearing faces from a single section – ideal for brackets, frames, trims, handrails and structural ties where you need stiffness in two directions without welding two flats together. Pair the L-shape with stainless corrosion resistance and you get a section that needs no coating and survives years outdoors.

Choose 304 for indoor and architectural use and 316 for coastal or chloride-exposed service. Equal-leg angles suit general framing; unequal-leg angles let you put more material exactly where the load is.

Specifications, Sizes & Surface Condition

We supply angle bar to ASTM A276 / A484 and EN 10056. Equal legs run from 20×20 mm to 150×150 mm; unequal legs to 100×60 mm; thickness 2-15 mm; length 6 m standard or cut to order.

• Form: hot-rolled, or laser-welded from strip for thin and small sections
• Surface: mill finish, pickled, or polished to Ra 0.4 for visible trim
• Tolerance: per A484 for hot-rolled; tight for laser-welded
• Also stocked: stainless flat bar, square bar and round bar

Typical 304 properties: tensile 515 MPa minimum, yield 205 MPa minimum, elongation 40% minimum.

Stainless Steel Angle Bar Price Factors

The stainless steel angle bar price per kg is set by grade first (316 costs 25-40% more than 304 for molybdenum), then by leg size and length-cutting. Laser-welded thin or small angles carry a premium over hot-rolled, and polished surface adds finishing cost.

• Grade: 316 / 316L for marine, 304 / 304L for architectural
• Leg and thickness: heavy angles cost more to roll
• Length: cut-to-length adds per-cut charges

Tell us the leg dimensions and finish you need and we will quote the most economical stock length to minimize offcuts.

Common Applications

Angle bar is everywhere structural stainless is used: handrails and balustrades, equipment and machine frames, structural ties and brackets, marine fittings, architectural trims and reveals, shelving and racking, and the corner reinforcement behind clad panels. Its two-face geometry makes it the fastest way to build a right-angle joint.

How to Choose a Reliable Supplier

Check three things: leg tolerance per A484, straightness (no bow or twist), and surface quality on visible sections, plus the mill cert for the grade you ordered. A reliable stainless steel angle bar supplier provides the cert and a finish sample before you commit.

Huaxiao Stainless maintains 100,000 tons of stainless stock, ships within 15 days, and holds ISO/TS16949 certification with full heat traceability from mill to your dock.

Frequently Asked Questions About Stainless steel angle bar

Get a Quote for Stainless steel angle bar

Stainless steel angle bar in stock: 100,000 tons available, 15-day delivery, certified to ISO/TS16949. Browse our stainless steel angle bar product page or contact us for a quote to get a competitive price today.